To remove the internal divider just unscrew the single screw holding the roof down, remove the roof and the internal divider simply slides out.

Bat boxes can be mounted on both buildings and trees. Try to position your box as high as possible in a sheltered sunny place. Ideally, several boxes should be put up facing in different directions to provide a range of conditions. Bats need time to find and explore new homes, and it may be several years before boxes have residents – be patient! Droppings on the landing area, stains around the lower parts of the box and chittering noises from inside on warm afternoons and evenings are signs of occupation.

Features:

• 20mm entrance slot is ideal for bats but deters birds.
• Close fitting panels and roof (precision cut by computer controlled equipment) for restricted airflow and improved heat retention.
• Bat ladder at base of box continues inside box to ensure bats find it easy to access and move around within the box.
• Easy and safe to erect box on walls or trees - light weight with 2 screw holes for mounting.
• Easy (1 screw) to remove roof for cleaning or inspection where permitted
• Manufactured in exterior grade Exterior grade plywood
• Designed for small crevice dwelling bats especially pipistrelles.
• Grooved landing ladder continues internally.
• Precision cut panels for dry, draught free, long-lasting box.
• Easily changed to a single chamber bat box by sliding the internal divider out.

Specifications:

• Materials: Exterior Grade Plywood.
• Construction: Panels stapled together with surface sunk staples.
• Finish: Box left untreated
• Entrance: 20mm wide slot.
• Access: Removable roof, secured with 1 screw.
• Fixing: 2 fixing holes in back panel for fixing to wall, tree etc.

Dimensions and Weight

• Dimensions: Overall height: 34cm, Overall width: 16cm, Overall Depth: 12cm
• 1.2kg